 |


Line Arrays
 |
|
CLA-16
The CLA-16 is the big brother of the CLA-9 compact curved array speaker. Featuring up to 127 dB of clean, smooth sound and an asymmetrical 45-degree vertical pattern, the CLA-16 provides smooth, even coverage beyond 100 feet.
Applications that previously called for heavy, expensive multi-box arrays can now be well-served with a single CLA-16. One amp channel, one bracket to hang - and the whole thing is barely eight inches thick!
Download PDF | More Info »
|
 |
|
CLA-9
The CLA-9 is an ultra-compact single-box J-array loudspeaker. A single CLA-9, using just one amp channel, will cover both the front row and the seats 75 feet away with tremendous clarity and punch. In fact, a single CLA-9 can replace four or five typical "compact array" boxes. The performance is superb, and the cost savings are tremendous as well!
Download PDF | More Info »
|
 |
|
MLA-16
Just 2" square in profile, the MLA-16 micro line array provides clear, articulate speech in a variety of short-throw AV applications. Featuring sixteen 1" inverted-dome drivers, the MLA-16 is well-suited to delay-fill, museum displays and retail POS display signage.
Download PDF | More Info »
|
 |
|
MLA-32
The MLA-32 is a longer version of the MLA-16 ultra-slim line array loudspeaker. Featuring thirty-two 1" inverted-dome drivers, the MLA-32 provides peak SPL up to 111 dB, and maintains usable pattern control to below 300 Hz. These featuers make the MLA-32 well-suited for small church voice-lift systems, courtrooms, delay/fill, museums and retail POS signage.
Download PDF | More Info »
|
 |
|
MLA-48
The MLA-48 is a six-foot long ultra-slim line array loudspeaker. Featuring forty-eight 1" inverted-dome drivers, the MLA-48 provides peak SPL up to 112 dB, and maintains usable pattern control down to 200 Hz. The MLA-48 is an excellent choice for transit stations, churches and delay/fill in large performing-arts centers.
Download PDF | More Info »
|
 |
|
SLA-10.1
As the tallest of our frequency-shaded column arrays, the SLA-10.1 provides longer throw and more control than the our smaller columnar arrays. With a footprint less than 5.5" x 3.5", the SLA-10.1 packs an amazing punch and sonic accuracy into an extremely slim columnar form.
Download PDF | More Info »
|
 |
|
SLA-4.1
The smallest member of the SLA frequency-shaded array family, our SLA-4.1 features an ultra-compact footprint, very flat response and consistent pattern control. Just over 2-ft. tall and under 3-1/2" deep, the SLA-4.1 provides smooth, controlled coverage for speech and light music program. It also makes an excellent delay-ring speaker in churches and theaters.
Download PDF | More Info »
|
 |
|
SLA-4.1 Tilt
The SLA-4.1 Tilt is an ultra-compact column array with a twist, or rather an angle. A built-in down angle on the ribbon tweeter allows this slender column to be mounted high and flat on a wall or column while covering a seated audience.
Download PDF | More Info »
|
 |
|
SLA-6.1
The SLA-6.1 is a very slim, compact frequency-shaded line array speaker featuring a ribbon tweeter and six 4" low-profile woofers. Extremely smooth, flat response and controlled vertical dispersion down to 600 Hz set this high-performance column apart from the competition.
Download PDF | More Info »
|
 |
|
SLA-6.1 Slim
The SLA-6.1 Slim is an ultra-compact, economical column array featuring six 3.5" woofers and a ribbon tweeter. It offers very smooth response and controlled dispersion in an enclosure barely 2" thick. Excellent speech intelligibility and naturalness are hallmarks of the SLA-6.1 Slim.
Download PDF | More Info »
|
 |
|
ULA-12.8
The ULA-12.8 is a stackable, ultra-low profile line array with a uniform 120H x 8V pattern. With twelve 4" woofers tight-packed alongside eight ribbon high-frequency devices, peak output reaches 129 dB at 1 meter. The ULA-12.8 can stack to produce line lengths of 12 feet (3 units) for tight, consistent pattern control through the entire vocal range.
Download PDF | More Info »
|
|
 |

 |
|
|
 |